Heat Tech Systems Inc.

Distributor for Unitherm Insolated Barrel Blankets

UniVest is a Modular Insulation Blanket designed for off the shelf ease on injection barrels, extruders or melt pipes and other types of cylinder applications. The blanket locks in place with Double D Buckles.

The Barrel Blanket Is made just like the UniVest but is for orders that need a specific dimension. The Barrel Blanket can be ordered in any size in increments of one inch from 13" - 44" circumference and 2" - 37" wide. Down load the Standards Parts Catalog above by just clicking on the text.

UniVest Modular Insulation Blankets

for Heaters, Dies, and Transfer Lines

Insulation Blankets to insulate most Injection Mold and Extrusion Machines. Insulate Transfer lines by using singles, or multiples side by side or insulate Blown Film or Blow Mold dies by strapping the blankets end to end to wrap a larger circumference.

UniVest Modular Insulation Blankets. The Blankets that gives you "Off-The-Shelf" purchasing ease.

Barrel Insulation Blankets

Like our UniVest Modular Insulation Blanket, but can be ordered to the specific size needed. One of our goals is to provide our customers with products that last longer, give better productivity, cut down time and make our customers more competitive in the market.

Custom Insulation Blankets

Insulation blankets custom manufactured to fit your insulating needs.

The Barrel Blankets above can be altered with slits, cutouts, or other augmentations.

For all other more complex objects CAD 3D is used to virtually design an insulation system for whatever application you have.

Offering energy savings (see Payback Incentives) and personnel protection benefits.

UniTherm covers a broad range of temperatures by using Insulation Systems fabricated from both high temperature and low temperature components.We work with our customers with multiple products and supply them with a company or corporate discount across all product lines to save you money.

UniTherm's main product is it's unequaled line of high temperature insulation blankets that will withstand 2000 degrees on the inner hot face. The blankets provides two primary functions.

First, they retain energy by directing the heat back into the injection barrels, extrusion barrels, blow molders die heads and other heated equipment. Typical payback is between 4 to 8 months.
Their secondary function is employee protection from potential burn and/or electrical shock. OSHA requires that all machines with temperatures exceeding 175 degrees, should be covered with some form of protection.

With the full line of products we supply you not only get very competitive prices, you also have only one source to call for all you needs.