Injection Molding Hot Runner Control
Main Frames
From 1 to 64 zones for all your Injection Molding Needs
|
MF-8-150 |
MF-16-170 |
MF-16-250 |
| Circuit Breaker |
(1) 50 Amps, 3 Pole ** |
(1) 70 Amps, 3 Pole ** |
(2) 50 Amps, 3 Pole ** |
|
Single 8 Zone main frame construction |
Two 8 Zone Main Frames stacked construction |
Two 8 Zone Main Frames stacked construction |
| Max. Amperage |
15 Amps per zone |
| Power |
240 VAC, Single Phase, 3 Wire (2 AC & 1 Ground), 50-60 Hz. |
| Vital Feature |
Anti-Arching circuitry |
| Thermocouple |
Type "J" |
| Mold Interface |
Accomplished through dedicated power cord with ground (PWC-8) and Thermocouple cable (THC-8) |
| Construction |
Heavy duty welded aluminum frame; air vent on bottom & side for cooling; top & bottom module insertion guides. Thermocouple Connector (FCK-TC, 25 pin, male) & Power Connector (FCK-PR, 25 pin, female) are mounted on the LHS of the main frame. Input power cord grip is mounted on RHS of the main frame (input power cord in not supplied). Completely self contained with no external components required. PFS-812 Floor Stand can be used to mount the main frame. It accepts all ITC temperature control modules. |
| Compatibility |
Compatible with industry standard control modules and main frames |
| Dimensions & Weight (without modules & cables) |
9" (H) x 20.25" (W) x 11.5" (D); Approx. 15 lbs |
18" (H) x 20.25" (W) x 11.5" (D); Approx. 32 lbs |
18" (H) x 20.25" (W) x 11.5" (D); Approx. 32 lbs |
 Top |
| | |
|
