Your Distributor for a Full Line of Filtroil Products
Including Water Separators

Features and Benefits

Features	Benefits
Full retrofit installation kit including: All necessary mounting brackets, bolts, hoses, and fittings.	10 easy installation steps. Only 15 minutes down time. One to two hours for complete installation.
Push Test Drain Valve	Test your oil consistency and easily with the push test button. It tests unfiltered oil straight from your high-pressure lines, giving you a good diagnosis of your current oil status.
No pumps, motors, or moving parts needed with our Pressure Compensated Flow Control Valve	The well-engineered design enables you to filter your oil by tapping into a high-pressure line for complete hydraulic system filtration. No energy required and no more moving parts to maintain.
Liquid Filled Pressure Gauge	The elements need to be changed every 2000 hours or every 3 months (whichever comes first); however, the pressure gauge indicates if an element needs to be changed before then.
0.1 Micron Filtration	This fine filtration will ensure that you prolong the life of your hydraulic components and hydraulic oil, eliminating costly down time and maintenance repair labor. Sub-micron particles will be removed that wear down expensive hydraulic components and which can account for more that 75% of you down time.
Shut-Off Valve	Lets you change the elements with no down time on your machines.
Approximately 400 yards of treated cellulose fiber	Filtroil's elements will give you a dirt holding capacity of over a pound of dirt and several ounces of water.
Water Eater Element	The special element will help you remove excess water in your oil in a short amount of time.

Hydraulic Filters The Hallmark of Oil Maintenance Filtroil's continuous oil recycling systems help you preserve and maintain the total hydraulic system: pumps, servo valves, proportional valves, and cartridge valves   BU-50 BU-100 BU-200 BU-400 Overall Dimensions 7.2"x11.5" 8.9"x12.2" 9.4"x12.2" 20"Wx10.5"Dx17.5"H Net Weight 16 lbs. 21 lbs. 25 lbs. 46 lbs. Quantity of Oil in Machine up to 150 gal. up to 325 gal. up to 450 gal. up to 1000 gal. Oil (ISO) Cleanliness 16/14/11 or better 16/14/11 or better 16/14/11 or better 16/14/11 or better Filtering Accuracy 0.1 micron 0.1 micron 0.1 micron 0.1 micron Flow Rate .30 GPM .50 GPM .65 GPM 1.20 GPM Min/Max Pressure at Flow Control Valve 200/5,000 PSI 200/5,000 PSI 200/5,000 PSI 200/5,000 PSI Housing Burst Strength 250-400 PSI 250-400 PSI 250-400 PSI 250-400 PSI Normal Viscosity 9-180 c St @ 40°C 9-180 c St @ 40°C 9-180 c St @ 40°C 9-180 c St @ 40°C Inlet Diameter SAE-4 (7/16-20) O-Ring SAE-4 (7/16-20) O-Ring SAE-4 (7/16-20) O-Ring SAE-6 (9/16-18) O-Ring Outlet Diameter SAE-6 (9/16-18) O-Ring SAE-6 (9/16-18) O-Ring SAE-6 (9/16-18) O-Ring SAE-8 (1/2-20) O-Ring Safety Valve Pressue 65-70 PSI 65-70 PSI 65-70 PSI 65-70 PSI Portable Units Filtroil's Filter Carts can be used in equipment requiring filtration of the following oils: Compressor, Gear, Hydraulic, Insulating, Lubrication, Machine, Rolling, Spindle, Trans, Turbine, and Washing Oils. Focus 800 Electric Portable Oil Reclamation Unit Focus 1200 Pneumatic Portable Oil Reclamation Unit Total Dirt-Holding Capacity = 5 lbs. Total Dirt-Holding Capacity = 7.5 lbs. Total Water-Removal Capacity = up to 80 fl.oz. (200E elements), 40 fl.oz. (200ME elements) Total Water-Removal Capacity = up to 120 fl.oz. (200E elements), 40 fl.oz. (200ME elements) (4) BU-200 canisters for utilizing the Filtroil 200E and 200ME (water-removal) elements. Filtering accuracy down to 0.1 micron achieving ISO codes of 16/14/11 or better. (6) BU-200 canisters for utilizing the Filtroil 200E and 200ME (water-removal) elements. Filtering accuracy down to 0.1 micron achieving ISO codes of 16/14/11 or better. Size: 30.3 (L) X 22.4 (W) X 19.7 (H) inches. Size: 41.0 (L) X 22.4 (W) X 19.7 (H) inches. Weight: 310 lbs. Weight: 350 lbs. Flow Rate: 4.2 gpm Flow Rate: 5.8 gpm Power Supply: 110V / 220V (50 or 60 Hertz) Power Supply: 110V / 220V (50 or 60 Hertz) Elements: 200 E (4) Elements: 200 E (6) Time Controller, Temperature Guage, Pressure Guage, Vaccum Guage, Operating Lamo, On/Off button. Time Controller, Temperature Guage, Pressure Guage, Vaccum Guage, Operating Lamo, On/Off button. Caster wheels and quick disconnects allow excellent mobility. Caster wheels and quick disconnects allow excellent mobility. Pump protected by cleanable 100µm suction filter. Pump protected by cleanable 100µm suction filter. Please Contact Us for Further Information Or Pricing. Sales@CompletePlastics.Com